Goobaha codsiga ee budada aluminiumka

1- Biraha Pigmen

【Cabbirka walxaha ayaa garaacay】D50=1-50 micron

【daahirnimo】: Al ≥ 99.80%

【Xakamaynta wasakhda】: Fe≤0.08% Si≤0.06%H2O≤0.1% Midkiiba≤0.01%

【Astaamaha】: Midab cad iyo mid dhalaalaya, saamayn macdan xoog leh, heerka caymiska sare, tayada joogtada ah ee u dhexeeya Dufcadaha kala duwan, wax soo saarka customized waa la heli karaa.

2- Qalabka Interface Thermal

waxay ku habboon tahay warshadaha conductivity kaamerada, walxaha interface kulaylka, dufan silikoon kulaylka kulaylka iyo xabagta conductive kulaylka

Baaxadda cabbirka walxaha:D50=1 - 70 micron

【daahirnimo】: Al ≥99.8%

【Xakamaynta wasakhda】: Fe≤0.08%, Si≤0.06%, H2O≤0.1%, midkiiba ≤0.01%

【Astaamaha】: daahirnimo sare, waxqabadka conductivity kulaylka wanaagsan, waxqabadka processing wanaagsan iyo kantaroolka wanaagsan ee Qurub aan dhab ahayn, wax soo saarka customized waa la heli karaa.

3- Xabagta Habboon ee Unug Cadceedda

waxay ku habboon tahay warshadaha koollada koollada ee unugyada qorraxda, oo ay ku jiraan koollada aluminium-dhaqameedka, PECK iwm, taas oo tayada wanaagsan ee badeecada.

【Baaxadda cabbirka walxaha】: D50=2 - 10 micron

【daahirnimo】: Al ≥99.8 Xakamaynta wasakhda: Fe≤0.08%, Si≤0.06%, H2O≤0.1%

【Astaamaha】: daahirsanaanta sare, conductivity korontada wanaagsan, waxqabadka processing wanaagsan iyo hufnaan sare ee isbeddelka, wax soo saarka customized waa la heli karaa.

4- Metallurgy Budada

【Baaxadda cabbirka walxaha】: D50=10 - 300 micron

【daahirnimo】: Al ≥99.8%

【Xakamaynta wasakhda】：Fe≤0.08%, Si≤0.06%, H2O≤0.1%, mid kasta≤0.01%

【Astaamaha】: nadiif sare, wasakh hoose iyo waxqabadka processing wanaagsan, wax soo saarka customized waa la heli karaa.

5- Beegsiga Beegsiga

【Baaxadda cabbirka walxaha】: D50=20 - 70 micron

【daahirnimo】： Al

【Astaamaha】: nadiif sare, wasakh hoose, content ogsijiin hooseeyo iyo waxqabadka processing wanaagsan, wax soo saarka customized waa la heli karaa.

6- xagga Kimistariga

waxay ku habboon tahay warshadaha kicinta kiimikada waxaana loo isticmaali karaa sida gudbiyaha birta qaaliga ah ee kicinta ama kicinta organic. Waxa kale oo ay khusaysaa alkyl aluminium, shidaalka tamarta, titanium dioxide iyo warshadaha kale.

【Baaxadda cabbirka walxaha】: D50=30 - 500 micron

【daahirnimo】: Al ≥99.8% Xakamaynta wasakhda: Fe≤0.08%, Si≤0.06%, H2O≤0.1%

【Astaamaha】: daahirnimo sare, wasakh hoose, sphericity wanaagsan iyo qaybinta xoogga saaray, wax soo saarka customized waa la heli karaa.

7- buufin kulaylka

【Baaxadda cabbirka walxaha】: D50=30 - 100 micron

【daahirnimo】： Al

【Astaamaha】: daahirsanaan sare, wasakh hoose, lebbis size qayb wanaagsan, wax soo saarka customized waa la heli karaa.

8- Qalabka Dib-u-celinta

【Baaxadda cabbirka walxaha】: D50=10 - 200 micron

【daahirnimo】: Al ≥99.8% Xakamaynta wasakhda: Fe≤0.08%, Si≤0.06%, H2O≤0.1%

【Astaamaha】: daahirnimo sare, wasakh hoose iyo lebis size qayb wanaagsan, wax soo saarka customized waa la heli karaa.

9- Daabacaadda 3D

Nuxurka tignoolajiyada daabacaadda 3D waa "teknoolojiyada soo saarista degdega ah", taas oo ku saleysan faylka moodelka dhijitaalka ah, iyadoo la adeegsanayo biraha budada ah ama balaastigga iyo walxaha kale ee dhejiska si loo dhiso walxaha daabacaadda lakabka.

【Baaxadda cabbirka walxaha】: D50=10 - 200 micron

【daahirnimo】: Al ≥99.8% Xakamaynta wasakhda: Fe≤0.08%, Si≤0.06%, H2O≤0.1%

【Astaamaha】: daahirnimo sare, wasakh hoose, sphericity wanaagsan, iyo qaybinta xoogga saaray, wax soo saarka customized waa la heli karaa.

10- Warshadaha Ciidamada

ka falcelin karaaHTPB, loogu talagalay Ku-darka Gantaalka Adag, Hawada Hawada iyo Walxaha Qarxa,

11- Kuwa kale iwm.