Nā kahua noi o ka pauda Aluminum

1- Metala Pigmen

【Ua kani ka nui o ka ʻāpana】：D50=1 – 50 micron

【Maemae】:Al ≥ 99.80%

【Ka hoʻomalu haumia】:Fe≤0.08%，Si≤0.06%，H2O≤0.1%，kekahi≤0.01%

【Nā hiʻohiʻona】: Keʻokeʻo a me ka ʻulaʻula, ka hopena metala ikaika, ka nui o ka uhi ʻana, ka maikaʻi kūlike ma waena o nā pūʻulu like ʻole, loaʻa ka hana maʻamau.

2- Mea hoʻohana wela wela

He kūpono ia no ka ʻoihana thermal conductivity, thermal interface material, thermal conductive silicone grease a me ka thermal conductive adhesive.

Ka nui o nā ʻāpana: D50=1 – 70 micron

【Maemae】:Al ≥99.8%

【Ka hoʻomalu haumia】:Fe≤0.08%，Si≤0.06%，H2O≤0.1%，kekahi ≤0.01%

【Nā hiʻohiʻona】: ka maʻemaʻe kiʻekiʻe, maikaʻi ka thermal conductivity hana, maikaʻi ka hana ʻana a me ka hoʻomalu maikaʻi ʻana i nā ʻāpana koʻikoʻi, loaʻa ka hana maʻamau.

3- Pākuʻi hoʻoheheʻe ʻia o ka lā

He kūpono ia no ka ʻoihana hoʻoheheʻe conductive solar cell, me ka paʻi alumini kuʻuna, PECK etc., kahi maikaʻi o ka huahana.

【Laulā nui ʻāpana】:D50=2 – 10 micron

【Maemae】: Al ≥99.8 Ka hoʻomalu haumia: Fe≤0.08%, Si≤0.06%, H2O≤0.1%, kekahi≤0.01%

【Nā hiʻohiʻona】: ka maʻemaʻe kiʻekiʻe, ka conductivity uila maikaʻi, ka hana hana maikaʻi a me ka hana kiʻekiʻe o ka hoʻololi ʻana, loaʻa ka hana maʻamau.

4- Ka pauda Metallurgy

【Laulā nui ʻāpana】:D50=10 – 300 micron

【Maemae】:Al ≥99.8%

【Ka hoʻomalu haumia】:Fe≤0.08%, Si≤0.06%, H2O≤0.1%, kekahi≤0.01%

【Nā hiʻohiʻona】:ʻO ka maʻemaʻe kiʻekiʻe, nā haumia haʻahaʻa a me ka hana hoʻoponopono maikaʻi, loaʻa ka hana maʻamau.

5- Sputtering Targets

【Laulā nui ʻāpana】:D50=20 – 70 micron

【Maemae】:Al ≥99.8% Ka hoʻomalu haumia: Fe≤0.08%，Si≤0.06%，H2O≤0.1%，kekahi≤0.01%

【Nā hiʻohiʻona】: ka maʻemaʻe kiʻekiʻe, nā haumia haʻahaʻa, ka haʻahaʻa oxygen haʻahaʻa a me ka hana hoʻoponopono maikaʻi, loaʻa ka hana maʻamau.

6- Ma ke Kemika

He kūpono ia no ka ʻoihana catalysis kemika a hiki ke hoʻohana ʻia ma ke ʻano he mea lawe i ka catalyst metala makamae a i ʻole catalyst organik. Hoʻopili pū ia i ka alkyl aluminika, ka wahie ikaika, titanium dioxide a me nā ʻoihana ʻē aʻe.

【Laulā nui ʻāpana】:D50=30 – 500 micron

【Maemae】: Al ≥99.8% Ka hoʻomalu haumia: Fe≤0.08%, Si≤0.06%, H2O≤0.1%, kekahi≤0.01%

【Nā hiʻohiʻona】: ka maʻemaʻe kiʻekiʻe, ka haumia haʻahaʻa, ka sphericity maikaʻi a me ka hāʻawi ʻana i ka paʻa, loaʻa ka hana maʻamau.

7- Puhi wela

【Laulā nui ʻāpana】:D50=30 – 100 micron

【Maemae】:Al ≥99.8% Ka hoʻomalu haumia: Fe≤0.08%，Si≤0.06%，H2O≤0.1%，kekahi≤0.01%

【Nā hiʻohiʻona】: ʻO ka maʻemaʻe kiʻekiʻe, ka haumia haʻahaʻa, ka like ʻana o ka nui o nā ʻāpana maikaʻi, loaʻa ka hana maʻamau.

8- Mea Hoohuoi

【Laulā nui ʻāpana】:D50=10 – 200 micron

【Maemae】: Al ≥99.8% Ka hoʻomalu haumia: Fe≤0.08%, Si≤0.06%, H2O≤0.1%, kekahi≤0.01%

【Nā hiʻohiʻona】: ʻO ka maʻemaʻe kiʻekiʻe, ka haumia haʻahaʻa a me ka like ʻana o ka nui o nā ʻāpana maikaʻi, loaʻa ka hana maʻamau.

9- Paʻi 3D

ʻO ke kumu o ka ʻenehana paʻi 3D ʻo ia ka "rapid prototyping technology", i hoʻokumu ʻia i ka faila kikohoʻe, me ka hoʻohana ʻana i ka pauka a i ʻole ka plastic a me nā mea hoʻopili ʻē aʻe e kūkulu i nā mea ma ka paʻi papa.

【Laulā nui ʻāpana】:D50=10 – 200 micron

【Maemae】: Al ≥99.8% Ka hoʻomalu haumia: Fe≤0.08%, Si≤0.06%, H2O≤0.1%, kekahi≤0.01%

【Nā hiʻohiʻona】: ka maʻemaʻe kiʻekiʻe, ka haumia haʻahaʻa, ka sphericity maikaʻi, a me ka hāʻawi ʻana i ka paʻa, loaʻa ka hana maʻamau.

10- ʻOihana Koa

hiki ke pane meHTPB, no ka mea hoʻohui i nā mea hoʻohui ʻia ʻo Solid Rocket Propellant, Aerospace a me nā mea pahū,

11- ʻO nā mea ʻē aʻe…